ミラー終了

思ってたよりだいぶ時間かかった感

fsrv1# zpool status zdata
  pool: zdata
 state: ONLINE
  scan: resilvered 688G in 0 days 12:49:40 with 0 errors on Sat Dec 17 10:52:30 2022
config:

        NAME                     STATE     READ WRITE CKSUM
        zdata                    ONLINE       0     0     0
          mirror-0               ONLINE       0     0     0
            gpt/WD-WMAZA9411575  ONLINE       0     0     0
            gpt/ZFL694RP         ONLINE       0     0     0

errors: No known data errors

この鯖稼働後だいぶたつからそろそろ新しくしないとな・・・ 古いHDDもだいぶヤバそうやし

smartctl 7.3 2022-02-28 r5338 [FreeBSD 12.3-RELEASE-p6 amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Green
Device Model:     WDC WD20EARX-00PASB0
Serial Number:    WD-WMAZA9411575
LU WWN Device Id: 5 0014ee 25c4e1f66
Firmware Version: 51.0AB51
User Capacity:    2,000,398,934,016 bytes [2.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        In smartctl database 7.3/5319
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sat Dec 17 11:23:50 2022 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (38160) seconds.

                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 368) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x3035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   199   051    Pre-fail  Always       -       10205
  3 Spin_Up_Time            0x0027   192   168   021    Pre-fail  Always       -       5383
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       228
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       1
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   001   001   000    Old_age   Always       -       91611
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       225
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       185
193 Load_Cycle_Count        0x0032   001   001   000    Old_age   Always       -       7865415
194 Temperature_Celsius     0x0022   122   096   000    Old_age   Always       -       28
196 Reallocated_Event_Count 0x0032   199   199   000    Old_age   Always       -       1
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       87
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   118   000    Old_age   Offline      -       1

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     20640         -
# 2  Extended offline    Completed without error       00%      6790         -
# 3  Extended offline    Completed without error       00%     60491         -
# 4  Extended offline    Completed: read failure       90%     60473         58606128
# 5  Extended offline    Completed: read failure       90%     60473         60814176
# 6  Extended offline    Completed: read failure       90%     60472         16602000
# 7  Extended offline    Completed: read failure       70%     60468         626604528
# 8  Short offline       Completed without error       00%     60466         -
# 9  Extended offline    Completed without error       00%     58969         -
#10  Short offline       Completed without error       00%     58962         -
#11  Extended offline    Completed: read failure       10%     58958         3901097304
#12  Short offline       Completed without error       00%     58951         -
#13  Short offline       Completed without error       00%     21927         -
#14  Short offline       Completed without error       00%      4724         -
5 of 5 failed self-tests are outdated by newer successful extended offline self-test # 2

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.